Customized-Designed, 3D Printed Instruments For Stitching and Quilting

Our October 2019 Hacker of the Month is a northern California resident who has taken her need to create cookie cutters and turned it right into a full-time product design and 3D printing manufacturing enterprise for {custom} stitching and quilting equipment.

Heather Snow, of purplehobbies.com, first caught the 3D printing bug again in 2014, “I first realized about 3D printing from Make journal. I learn their 3D printer evaluation articles that inspired me to buy my first 3D printer.”

However Heather’s preliminary urge to pursue 3D printing got here from the necessity to create {custom} cookie cutters. “You’re going to snigger—I needed to make cookie cutters and pasta extruder discs. I used to be utilizing free 3D software program on-line to make what I assumed have been easy daisy-shaped flower cookie cutters. The software program stored crashing and it was driving me loopy. A good friend at work advisable SolidWorks, so I purchased a replica (I used to be working at a excessive tech firm on the time and this was my approach of enjoyable—no less than that’s how I justified the acquisition on the time.) A number of years of attempting to be taught SolidWorks by myself left me annoyed however nonetheless decided.”

“However just a few years in the past I used to be lucky sufficient to have the ability to give up my day job and enrolled full time in SolidWorks courses at DeAnza Group School.  The professor began the category saying “We construct issues that don’t fall out of the sky”, referring to designs for airplanes and helicopters. I sat there considering, “I simply wish to make cookie cutters!”  I took a number of SolidWorks courses at De Anza Group School and this made an amazing distinction within the high quality of my designs and my understanding of 3D modeling. I nonetheless have heaps to be taught in fact, however De Anza Group School continues to be a superb supply of the most recent in trade information for 3D printing and courses for all of the most well-liked CAD software program.”

With all her design expertise and training, Heather creates her prints with an overriding precept that we are able to all get behind: No Helps. “I spend an amazing period of time designing my objects so there are not any helps wanted.  I do need to do some little bit of sanding tough edges on among the components, however my aim is to be as near zero post-processing as doable! Probably the most intensive post-processing I do is with the Dinosaur TacoBuddy—I bake them to anneal them which additionally makes them dishwasher protected!”

Heather at present has a small print-farm consisting of a number of Ultimaker 3s, a Raise3D Pro2, a Dremel 3D40 (her favourite for printing TPU) and a Dremel Digilab 3D45. She sticks with the native slicers for every of the printers; Cura for the Ultimakers, Dremel’s Cloud software program, and IdeaMaker for the Raise3D. She nonetheless makes use of SolidWorks to create all her designs, though it was not simple to be taught, she says the time she invested into SolidWorks was properly value it.

Heather and her household are all the time prepared for one thing to interrupt in the home and use 3D printing to provide you with a fast, cost-effective resolution, in addition to going via the iterative course of to create the proper print. “We use 3D printing for EVERYTHING at my home. If one thing is damaged, we create a alternative half. If we’d like a device, we create and print one. 3D printing is superior, however the actual magic comes while you mix it with the power to create your personal designs. Now, no matter we are able to think about we are able to maintain in our fingers in a matter of hours (OK, typically days) and that’s nonetheless completely wonderful to me. I really like fixing issues, and the extra I realized about 3D modeling, the extra issues I noticed that I might “repair” with 3D printing. From dinosaur-shaped taco holders to custom-designed quilt instruments I’ve been having a blast with 3D printing.”

“My son’s cat likes to drink water from wherever however his water bowl. Each time I set down a glass of water the cat would instantly seem and stick his head within the glass to begin consuming.  YUK! I created lids with straw holes for mason jars to maintain the cat out. The primary ones I made have been out of PLA and they might leak if I tilted the jar so I began to print them utilizing TPU and so they work nice! They’re additionally dishwasher protected which is an additional benefit.”

“I’m additionally a fan of big espresso mugs and mine was leaving rings on our new wooden desk. There aren’t coasters available on the market giant sufficient for my espresso mug so I designed my very own and now it’s a spot for us to brighten for the vacations: flowers within the spring, snowflakes within the winter, and many others.”

Heather has taken all of her training, expertise, and design-savvy to create a enterprise producing instruments for an additional trade; stitching and quilting. “I’ve created a number of quilting instruments which have helped maintain folks safer and extra environment friendly. I used to be taking a quilt class in the future and the lady subsequent to me stored stabbing herself with pins each time she tried to choose one up. I assumed that there needed to be a greater option to maintain the pins so she wouldn’t maintain getting harm and the Magnetic Pin Cup was born. It’s a cup that holds the pins sharp facet down with magnets, however it additionally has a telescoping carrying case and lid that twist shut to securely transport the pins. There are a number of different quilting instruments I created to make issues both safer or simpler. My BladeSaver Thread Cutter permits folks to reuse a 45mm rotary blade that they might have in any other case thrown away. The design safely holds the blade and permits threads to be reduce however doesn’t enable fingers wherever close to the blade. There are a number of different instruments that assist quilters when a 3rd hand would come in useful.”

Heather primarily makes use of PLA in her 3D prints, “ I’m involved concerning the particles emitted from printing with different filaments. I exploit a whole lot of Matterhackers MHBuild and PRO Sequence filament as a result of it’s so constant (no, I wasn’t informed to say this!). I additionally use TPU for mason jar lids and some different devices I’m at present designing.”

Heather can also be a fan of how 3D printing permits her to be versatile in her enterprise mannequin when the necessity arises, “3D printing permits me to supply many colours and scale manufacturing to create no matter is in demand in the mean time. A good friend blogged about my merchandise and I had a run on a particular colour that she talked about. It was nice to have the ability to instantly ramp up manufacturing of that colour for just a few days after which return to the common set of colours afterward.”

“I used to be additionally fortunate sufficient to get a distributor taken with promoting my merchandise. This meant extra quantity was wanted shortly.  It was nice to have the ability to order just a few extra Ultimakers from MatterHackers and have them busy producing merchandise simply two days later, and at a fraction of the price of injection mould tooling!”

Most of Heather’s ardour for creating these merchandise comes from her love of baking, stitching, and quilting – one other degree of Making that pairs extraordinarily properly with 3D printing and vacuum forming. “Quilting and cooking are my two favourite hobbies. Each time I battle and want there was a less complicated option to do one thing I take into consideration how I might remedy the issue with 3D printing.

“My grandmother used to chop a gap within the prime of her Morton salt containers so she might stick a measuring spoon inside. I took that concept one step additional and created a swiveling lid for the salt container. I like to make cookies however I’m horrible at adorning them so I create mixture cookie cutters and stamps. The cutters clearly reduce out the shapes and the stamps present the strains for the designs. Simple!”

“Candies are one among our favourite issues to make. I exploit a mix of 3D printing and the Mayku vacuum forming machine to make {custom} chocolate designs. We created particular eightieth birthday chocolate discs for my father’s birthday.”

“Somebody stole one of many spherical tow covers from the bumper of my automobile. This left an unpleasant gap within the bumper so my son designed and 3D printed a set of flowers to fill the outlet (and changed the remaining tow cowl so it’s symmetrical). Sure, 3D printing is contagious. Each of my sons create and 3D print issues often.”

Heather hopes to see lots of the issues that the group is in search of sooner or later for 3D printing; accessibility, and sustainability. “I wish to see 3D printers in each house so folks should buy and obtain designs to print in no matter colour and materials they need. I might like to see 3D modeling supplied to all college students as a primary ability. It took me some time to rewire my mind to consider easy methods to design issues in 3D, however now that I can create no matter I can dream up I’m having a blast! I might additionally wish to see recycling for filaments and printed components. PLA is labeled as biodegradable, but when we might get it recycled that may be superior for customers and for the earth.”

Lastly, pulling from private expertise, Heather is aware of that training surrounding digital fabrication strategies like 3D printing is paramount. “I’m an enormous believer in hands-on studying.  I might like to see extra packages like DeAnza Group School has the place they educate 3D modeling in addition to easy methods to use 3D printers, how to decide on the right 3D printing course of, and many others. The problem is that packages like this give attention to skilled 3D printing—I wish to see extra coaching for house use. I benefit from the YouTube movies that MatterHackers publishes in addition to these revealed by many 3D printing fans, however nothing beats actual, hands-on expertise.  It might be nice if there have been multi-day boot camps to show folks easy methods to use 3D printers and easy methods to preserve and troubleshoot them. We additionally want 3D printing superstores the place you’ll be able to go in and get assist from a 3D printing professional with both troubleshooting a printing drawback or assist with making a design for 3D printing.”

We are able to’t wait to see how Purple Hobbies continues to achieve success with Heather’s artistic drive and spirit! If you need to be taught extra about Heather and Purple Hobbies, you’ll be able to go to her web site right here:

https://www.purplehobbies.com/

Are you a 3D printing Hacker or know somebody that’s? We’d like to share their tales with the 3D printing group! Please e mail chris.morgan@matterhackers.com with data, and also you or your good friend could possibly be our featured Hacker of the Month.