[ad_1]
Don’t fret if it takes you a short while to do that step. I did not do it twice earlier than I received it proper, and all of it comes all the way down to that high proper nook detaching correctly.
Step 5: Take away the Growth Slot Cowl and SSD Screw
It is time to unscrew issues. Begin by eradicating the oblong steel growth slot cowl within the high left of your PS5, subsequent to the fan.
Utilizing your screwdriver—and the great ol’ lefty loosey, righty tighty mindset; in different phrases, flip it counterclockwise—take away the small screw on the high of the duvet and set it apart for now. Watch out when eradicating it to ensure it does not fall contained in the fan. Slide the duvet towards the highest fringe of your PS5 so the clip detaches, then pull it out and set it apart.
As soon as the duvet is eliminated, you will notice a inexperienced space with 5 screw holes. Relying on the dimensions of the SSD you bought, you’ll use certainly one of these holes to safe your drive to the PS5.
First, take away the SSD screw within the very high slot (110) and set it apart, however maintain it inside attain for now. Beneath the screw, you will notice a silver spacer that appears like just a little silver ring. This spacer is used to make sure your SSD correctly strains up with the circuit board. For those who do not already know what dimension your SSD is, measure it in opposition to the inexperienced space (with the steel prongs going through in the direction of you and the opening for the screw on the high) to see which of the slots the spacer ought to sit in. Place the spacer on this gap.
Step 6: Mount the SSD
To put in your SSD you will have to align its connection prongs, which ought to already be going through in the direction of you, with the PS5’s circuit board. The best method to do that is to tilt the SSD barely, so the highest (the place the screw will go) is larger horizontally than the underside. Then, firmly push the SSD into the board till you hear it click on into place.
Subsequent, gently push the highest of the SSD down so the opening on the high aligns with the opening the place you positioned the spacer. Fasten the SSD by twisting the screw again into the spacer.
[ad_2]
