[ad_1]
|
Take heed to this text  |
The OES FIGARO is a 1 to 4 axis movement controller out there in a regular 19″ rack mountable unit. | Credit score: OES
The OES FIGARO sequence is a NEW movement management system launched to enrich Optimum Engineering Methods’ rising line of single and multi-axis positioning levels. The FIGARO sequence is an easy-to-use, plug-and-play, value efficient answer movement controller.
The usual 1, 2, 3, and 4 axis FIGARO Movement Management Methods can be found as compact, countertop enclosures or 19 inch rack mounts for Stepper Motors, DC Servo Motors with Quadrature Incremental Encoders, three-phase Brushless DC Servo Motors with Quadrature Incremental Encoders and Corridor Impact Sensors, or Voice Coil motors with linear encoders.
Moreover, the FIGARO sequence could be configured with any mixture of drivers for Steppers, DC Servos, and BLDC Motors.
An exterior host corresponding to a PC, micro-controller or PLC sends instructions to the Controller through a USB or RS-232 serial port, and the Controller processes and executes the instructions. When instructions are loaded into the controller’s reminiscence, the controller is able to operating the instructions with out want of the host.
The FIGARO sequence works with host put in applications corresponding to: C/C++, Python, Visible Fundamental, LabVIEWTM, and MATLABTM. Additionally, the System could be operated utilizing an analog joystick or a trackball. Choices embody: HOME and LIMIT switches, TTL/CMOS Inputs and Outputs, Quadrature Encoder Suggestions, and an Ethernet interface.
The FIGARO Movement Controllers can present as much as 7 Amps per part present, and as much as 256 micro-steps per step decision, for stepping motors from NEMA 8 to 42; for DC Servos and BLDC motors as much as 40 Amps per part, and + 18 VDC to 80 VDC energy provide voltage.
Simple to put in and use these Movement Management Methods are completely built-in options that includes free software program. The FIGARO Movement Management Methods function on an enter energy of 115 or 230 VAC, 50-60 Hz, and could be ordered Plug-and-Play when ordering any one of many many single or multi-axis positioning levels which might be out there from OES.
[ad_2]
