[ad_1]
Electronics startup Axzez has opened pre-orders for a Raspberry Pi Compute Module provider board designed for Community Hooked up Storage (NAS) and Web of Issues (IoT) purposes: the Interceptor.
“The Axzez Interceptor [is] a Raspberry Pi CM4 provider board for NAS, NVR, IoT, and managed change purposes,” the corporate writes of its creation. “Axzez conveniently gives a Raspbian 11 ‘Bullseye’ working system, drivers, and setup picture, which may be downloaded without cost. With our installer picture, you’ll be up and operating in minutes. No drivers to put in or configuration to determine.”
Designed to host a Raspberry Pi Compute Module 4, which incorporates 4 Arm Cortex-A72 processor cores, a VideoCore VI graphics core, and as much as 8GB of RAM, the provider board contains 5 SATA ports, 4 gigabit Ethernet ports, two full-size USB 2.0 ports and an extra two ports through nine-pin header, two full-size HDMI show connectors, and an RS-485 port.
The compact Interceptor takes intention at five-drive NAS and four-port change and router tasks. (📷: Axzez)
On high of this, Axzez’s design features a real-time clock with battery backup, 4 three-pin fan connectors, an eight-pin header for energy LED, energy button, and UART serial, and two FFC connectors — unused at current however accessible, the corporate says, “for later enlargement.” Energy, in the meantime, is supplied on a 24-pin ATX connector — making it straight appropriate with instances and energy provides designed for extra conventional PCs.
The corporate has opened pre-orders for the Interceptor on its web site at $99, and not using a Compute Module 4, and expects to start transport from the primary manufacturing run in mid-February — however warns solely “a restricted amount” will likely be accessible.
[ad_2]
